Receiver Guide

Receiving Freight Without a Loading Dock: A Planning Checklist

When freight arrives at a site with no loading dock, the delivery works only if the receiver has thought through the equipment, the space, and the scope of service in advance. These are the decisions that belong to the receiving location — worth settling before the shipment is dispatched, not after the truck is at the gate.

Published · SENA Logistics

Start with the receiving location, not the freight

Planning the unloading method before dispatch helps the parties identify access and equipment requirements.

The receiver should confirm site conditions with the shipper and broker so the carrier can evaluate the requested service.

What this guide does not do

It does not set weight or dimension limits. Those come from the carrier, the equipment actually assigned, and the individual delivery. Anything specific to your shipment should be confirmed for your shipment, before dispatch.

The receiver decisions, in order

1. Dock, forklift, or equipment — and a qualified operator

State plainly what exists at the site: a dock, a forklift, neither, or both. If a forklift is available, name who is trained and available to run it at the expected delivery time. Equipment with no operator is effectively the same as no equipment, and that is not always obvious to anyone outside the site.

2. Packaged dimensions and gross weight, per unit

Give the packaged dimensions and gross weight of each handling unit — each pallet, crate, or carton group — not one total for the shipment. A total does not show how the weight is distributed across units. If figures are estimates, say so.

3. Liftgate suitability is not just a weight question

Liftgate service raises freight between ground level and the trailer bed when there is no dock. Suitability depends on both the equipment's limits and the footprint of the freight being lifted — a heavy but compact unit and a lighter but long or tall one can behave very differently on a platform.

Supply your per-unit dimensions and weight to whoever is arranging the move, and confirm the liftgate being sent suits those units.

4. A safe, firm, level place to unload

Ask the carrier to confirm that the proposed unloading area is suitable for the assigned equipment. Describe surface condition, slope, obstacles and weather exposure; do not assume a pallet jack or liftgate can operate on every surface.

Confirm truck access too: that a tractor-trailer can arrive, turn, and park at a usable angle, and note overhead obstructions, tight gates, or height restrictions. A site that works for a box truck is not automatically workable for a 53-foot trailer.

5. What "delivery" actually means here

Ground-level delivery and inside delivery are different scopes. Where the freight stops — curb, door, or inside a room — changes the equipment, labor, time, and charge. Confirm the scope separately with the carrier for your shipment. Be specific, separately, about:

  • Ground-level unloading only, or delivery inside the building
  • If inside: which room or floor, and the path the freight takes
  • Whether unpacking or debris removal is expected — and who does it
  • Whether the site requires an appointment or notification before arrival
  • Who at the site is authorized to accept the freight
  • Receiving restrictions: curfews, closures, gate procedures, PPE rules

None of these should be assumed. Where a scope is not part of the service, say so rather than leaving it open — an unconfirmed expectation becomes a dispute at the door.

6. Receiver contact, hours, and a fallback plan

Name the receiving contact, a backup, and the site's real receiving hours, including closures. Confirm whom to contact and how changes will be handled before dispatch.

Worksheet for the receiving site

These are the inputs the receiving location should supply — before a quote is confirmed, and again any time the freight, packaging, or site changes.

ItemWhat to record
Address and accessFull address, gate or entrance instructions, turnaround space, and any vehicle size or height constraints.
Unit dimensions and weightPackaged dimensions and gross weight for each unit, plus the number of units.
Equipment and operatorDock, forklift, or none; if a forklift, who is trained and available at the expected time.
Unloading locationWhere the freight comes down: surface condition, level, firmness, and distance from the truck.
ScopeGround level or inside; room and path; unpacking or debris removal; appointment or notification required.
ContactReceiving contact, backup contact, and accurate receiving hours including closures.
Booking confirmationWhich items are confirmed for this shipment, and which remain open or estimated.

How this fits into getting a quote

SENA Logistics is a freight broker, not a motor carrier; we arrange transportation through carriers, and delivery-end equipment is matched to the shipment and confirmed with the carrier. Bring these details when you request a freight quote. The freight quote preparation checklist covers the shipment side; preparing palletized freight for pickup covers the packaging; and accessorial charges explained covers the terminology behind liftgate and inside delivery.

Further reading